Typical Stock Range (Rochdale)

Address: The Klondike, Chichester Street, Rochdale, Lancashire OL16 2AU

At our Rochdale site we typically carry the following range of products.

Prime S275JR/S355J2N

  • Certification – material fully certified.

  • Thickness & Length  – Thickness range 5mm to 300mm in lengths up to 14000mm and widths up to 3000mm, sometimes wider.

Large area new production mill over-rollings

  • Certification – some with 2.2 certification or 3.1 Lab Certs.

  • Source – This material is generally sourced within the EU.

  • Grades – The grades available are widespread including S275JR, S355J2N, S460NL and even C45.

  • Thickness range – 5mm to 300mm in lengths up to 14000mm and widths up to 3000mm, sometimes wider.

Prime 400/450HB grade wear resistant plate and S690QL high strength plate.

  • Thickness range – 6mm to 60mm.

  • Typical dimension – 6000mm x 2500mm

Typical Stock Range (Omagh, Ireland)

Address: Donnell & Ellis Heavy Haulage Ltd, 46, Beltany Rd, Omagh, Co Tyrone. BT78 5NF

At our Omagh site we typically carry a full range of steel sheets as outlined below.

Mild Steel Sheet – Strip Mill Product

  • Size: 2000mm x 1000mm Thickness: 2mm to 12mm
  • Size: 3000mm x 1500mm Thickness: 2mm to 15mm
  • Size: 4000mm x 2000mm Thickness: 3mm to 12mm

We also keep a large range of non-standard sizes in a thickness range of 2mm to 15mm often proving a cost effective solution when standard sizes do not fit. Some of this stock is in S355 grade where a slightly higher strength is required.

To compliment the strip stock we keep a range of reversing mill plate from 10mm to 50mm in mild steel and S355 grade. These items are up to 2500mm in width.

400HB Wear and 700MC high yield plate

There is a stock of specialist high strength and wear resistant steel held in Ireland in thicknesses from 6mm to 40mm.

Ex-Stock Range of 3000 – 4000 Tons of Steel.

Become One Of Genesis Steels Informed Partners.